FM35 Walk-Behind Flail Mower
Heavy duty mowing for tough environments
The FM35 48″ walk-behind flail mower is designed to combat the most demanding environments and is ideal for mowing rough and overgrown areas. The strong welded steel construction houses a robust flail rotor of 122 cm cutting width with 34 independent flail blades which deliver excellent cutting action. This efficient flail mower is designed to excel in applications such as landscaping, agriculture, utility, maintenance, construction sites, road right-of ways, trails, and all other areas needing overgrowth control. Cut, mulch and spread, leaving a fine finish, with the FM35 walk-behind flail mower.
FM35 Flail Features
34 J-type flail cutters
34 J-type flail cutters, rotor bearing debris shields and flexible rubber debris guards.
Protective guards
Impact protective guards to avoid damage to rotor bearings and belt drive system.
Shaft driven construction
Strong shaft driven construction with gearbox and universal joint between engine and flail rotor.
Rotor design
Swept lug design which is more forgiving for accidental impacts.
Rotor bearing protection
Rotor bearing protection and adjustable hardened skid plates.
Over 180 degrees belt wrap
More than 180 degree belt wrap on drive system from shaft drive to flail rotor to ensure power transmission to rotor. Rotor drive powered by a bonded duplex belt.
FM35 Walk-Behind Flail Mower Specification
FM35BV2648CE
Engine |
|
|---|---|
| Make | Vanguard – Petrol |
| Model | 810cc |
| Horsepower | 26 HP |
| Cylinders / Displacement | 2 Cylinders V-Twin / 810 cc |
| Cooling | Air cooled |
| PTO | Electric PTO clutch |
| Starting | Electric |
| Fuel Capacity | 19 Litres |
Mower |
|
| Cutting width (cm/inch) | 122 cm / 48” Flail mower |
| Deck Configuration | Up-milling flail rotor |
| Cutting Height (cm) | 5,0 – 8,9 cm |
| Deck Construction | 3,4 / 4,6 mm fabricated construction with secondary internal shroud |
| Mower Spindles | Drum type 102 mm with 34 individual swinging cutters |
| Deck lift system | 5 Individual spacers |
Suspension & Drive Train |
|
| Suspension | n.a. |
| Transmission | Independent Hydro-Gear® ZT-3100™ transaxles |
| Drive Axles | 25,4 mm Tapered with 4-bolt flange |
| Drive Tyres (inch) | 20 x 8.00 – 10 (4 ply) chevron tread |
| Caster Tyres (inch) | 9 x 3.50 – 4 (4 ply) flat free |
Noise and Vibration |
|
| HAV | < 2.9 |
| WBV | N/A |
| Sound dB(A) | 104 |
Ground Speed |
|
| Speed-fwd. (km/h) | 0 – 11 km/h |
| Speed-rev. (km/h) | 0 – 4,5 km/h |
Dimensions |
|
| Overall length (cm) | 210 |
| Overall width (cm) | 140 |
| Dry weight (Kgs) | 354 |
Operator Control & Comfort Systems |
|
| Roll-Over Protection Structure | n.a. |
| Instrumentation | Speed indicator, hour meter |
| Controls | Operator presence, cruise control bar, independent forward and reverse levers, foot activated neutral |
| Parking Brake / Safety Circuit | Integrated transaxle brake |
Warranty |
|
| Engine | 3-Year Manufacturer’s Limited Warranty |
| Deck Drive Belt | 1-Year Limited/100 hours, whichever comes first, on parts & labour. |
| Balance of machine | 2-Year Limited Warranty commercial use. Unlimited hours, front to rear, parts and labour. Belts, Tyres, Brake Pads, Battery, Blades: 90 days |