ISX™3300
Featuring the next generation of Ferris suspension technology – ForeFront™ Suspension, a 2-belt iCD™ cutting system, heavy-duty Hydro-Gear® drive system and travel speeds up to 12 mph, the ISX™ 3300 is engineered to increase efficiency and operator comfort.
The ISX™ 3300 also benefits from the Vanguard Oil Guard™ System, a first of its kind solution in the industry and exclusive to Ferris Vanguard EFI engine mowers. The Oil Guard system extends the interval required between oil changes from 100 hours to 500 hours, saving you time and money when it comes to oil maintenance. Oil Guard is the only turf engine system that continuously exchanges oil between the engine and a large external reservoir, to shield engine oil from thermal breakdown, resulting in a cooler-running engine, ensures proper lubrication during off-angle operation, mess-free oil change and extends oil service intervals, which translates to increased productivity!
The Vanguard EFI Petrol engine from Briggs & Stratton provides a wide range of benefits including reduced fuel consumption, leading to 25% better fuel economy than a carbureted engine, increased power, optimised hot and cold starting and engine performance that increases governing control and load acceptance.
ISX™ 3300 Features
For the most challenging applications, the Vanguard™ BIG BLOCK™ engine with Electronic Fuel Injection has been expertly engineered to deliver the dependability to get more done in less time.
The iCD™ Cutting System allows better airflow, superior cut quality and complements the innovation of the Ferris line.
The patented ForeFront suspension system uses four upper and lower control rods and mower-specific shocks that ensure the front caster bearing remains vertical through the full range of travel. This controlled motion results in a smoother ride, more precise tracing of the terrain and an improved cut.
Patented steering system delivers exceptionally smooth performance.
The comfortable operator seat helps you mow in superior comfort with adjustable armrests and multi-position headrest,
Exclusive Oil Guard system, extending oil change interval to 500 hours for increased productivity and reduced downtime.
Hercules™ II cast-iron mower spindles with oversized 62 mm industrial – double row – angular contact ball bearings, 30,16 mm shaft and 257 mm 6-bolt flange design.
Dual, commercial Hydro-Gear® ZT-5400 Powertrain® transaxles deliver unmatched power and durability.
Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.
Hydraulic deck lift, with adjustable pedal, can change cut height in 1/4″ increments from 1.5″- 5″.
Specification
| Engine | |
|---|---|
| Make | Vanguard™ – Petrol |
| Model | BIG BLOCK™ EFI |
| Horsepower | 37 HP |
| Cylinders / Displacement | 2 Cylinders V-Twin / 993 cc |
| Cooling | Air-cooled |
| PTO | Electric PTO clutch |
| Starting | Electric |
| Fuel Capacity | 42 Litres |
| Mower | |
| Cutting width (cm/inch) | 155 cm / 61” Rear Discharge iCD™ |
| Deck Configuration | Rear discharge/mulching insert and mulching blades |
| Cutting Height (cm) | 3,8 – 12,7 cm |
| Deck Construction | 3,4 mm fabricated construction, full width double top deck, 12,7 mm scuff guards, 12,7 mm leading edge, overlap welded corners |
| Mower Spindles | Hercules II Cast-iron 257 mm; 30,16 mm shaft |
| Deck lift system | Hydraulic |
| Suspension & Drive Train | |
| Suspension | 4-Wheel independent suspension |
| Transmission | Independent Hydro-Gear® ZT-5400™ transaxles |
| Drive Axles | 34,93 mm drive axles with 5 bolt wheel hubs |
| Drive Tyres (inch) | 26 x 12.00 – 12 (4 ply) |
| Caster Tyres (inch) | 13 x 6.50 – 6 (4 ply) |
| Noise and Vibration | |
| HAV | < 2.5 |
| WBV | < 0.5 |
| Sound dB(A) | 105 |
| Ground Speed | |
| Speed-fwd. (km/h) | 0 – 12 mph |
| Speed-rev. (km/h) | 0 – 5 mph |
| Dimensions | |
| Overall length (cm) | 215 |
| Overall width (cm) | 169 |
| Dry weight (Kgs) | 752 |
| Operator Control & Comfort Systems | |
| Roll-Over Protection Structure | Standard, 165-degrees foldable with seat belt |
| Instrumentation | Fuel level gauge in each tank, hour meter, engine malfunction indicator |
| Instrumentation | Fuel level gauge in each tank, hour meter, engine malfunction indicator |
| Controls | Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit, adjustable twin steering controls |
| Operator Seat | Superior quality seat with adjustable arm-rests and multi-position headrest. |
| Warranty | |
| Engine | 3-Year Manufacturer’s Limited Warranty |
| Transmission | 2-Year Manufacturer’s Limited Warranty |
| Balance of machine | 4-Year limited warranty (48 months) or 500 hours, whichever occurs first. Unlimited hours during the first 2 years (24 months). Coil-over-shocks and all suspension related components are covered for 5 years (60 months) unlimited hours. Belts, tires, brake pads, battery, blades: 90 days. |